Leading UK Manufacturer of Solder Paste, Solid & Cored Solder Wires, Lead Free & Rosin Free Solders, Fluxes, Cleaners and High Purity Bar Solder Products.

Availability options

Product	Description		Use	Packaging
Ultra	A low VOC, non-flammable, aqueous based cleaning solution formulated for automated ultrasonic stencil cleaning. Residues are rinsed off with de-ionised water. Surf Clean Ultra provides excellent performance in removing uncured adhesives, pastes and paste fluxes.		For the removal of uncured adhesives, solder paste and paste fluxes. Suitable for automated ultrasonic or spray under immersion batch cleaning methods.	0.5L, 1L, 5L, 10L & 25 Litre containers
SCS 15-22	An ozone friendly, non flammable, aqueous based saponifier for efficient cleaning of electronic assemblies and general degreasing operations. Residues are rinsed off with de-ionised water. SCS 15-22 easily removes post soldering residues from rosin/resin and no clean type fluxes following wave soldering, hand soldering and reflow processes. Exceptional cleanliness achieved to military standards (J-STD-001B). No offensive odour.		For the removal of wire flux and general cleaning. Suitable for manual and automated operations, ultrasonic or spray under immersion batch cleaning methods.	0.5L, 1L, 5L, 10L, 25 Litre containers & flux pens
SCS 18-44	A water based, non flammable cleaner with no offensive odour. No dilution required, ready to use. Exceptional cleanliness achieved to military standards (J-STD-001B).		For the removal of wire, flux and solder paste.	0.5L, 1L, 5L, 10L, 25 Litre containers
SCS 20-8	A moderate evaporation stencil cleaner excellent in removing uncured adhesives, pastes and paste fluxes on squeegee and stencils. Surf Clean SCS 20-8 has a flashpoint > 61°C.		For removal of uncured adhesives, pastes and paste fluxes.	0.5L, 1L, 5L, 10L, 25 Litre containers, 500ml trigger spray bottles
SCS 30-9	A moderate evaporation stencil cleaner excellent in removing dried on paste residues on squeegee and stencils. Surf Clean SCS 30-9 has a flashpoint > 35°C.		For removal of paste residues on squeegee and stencils.	0.5L, 1L, 5L, 10L, 25 Litre containers, 500ml trigger spray bottles, Wipes
SCS 10-0	An isopropanol based fast drying cleaner for general cleaning applications.		A wide range of cleaning uses. Fast drying.	0.5L, 1L, 5L, 10L, 25 Litre containers, 500ml trigger spray bottles
SCS 10-0 Wipe Bucket	White spun lace, Polycellulose 65gsm smooth surface wipes, low lint, very strong wet or dry, no chemical binders, low extractables. Wipes soaked with Surf Clean SCS 10-0 an IPA based cleaner, which is used for cleaning in cleanrooms and other controlled environments because of its enhanced ability to clean a wide range of contamination from critical surfaces. It evaporates quickly. It removes dust, grease and fingerprints, and is particularly effective on stainless steel.		Because they are safe on most plastics, our pre-saturated IPA based wipes have found a huge variety of uses in general cleaning and degreasing.	100 wipes sheet size 20cm length, 20cm wide supplied in a 2 Litre cannister
Total Clean Stencil Wipe Bucket	White spun lace, Polycellulose 65gsm Lint free wipes with a smooth surface. Low lint and solvent resistant. Wipes are soaked with a unique blend of hydrocarbon solvents, which offer efficient paste removal of rosin and rosin free solder paste. The solvent blend has been carefully chosen to allow sufficient time to thoroughly clean dried paste on the stencil or squeegee blades. Once the stencil is clean, drying takes only a matter of moments.		For stencil cleaning.	100 wipes sheet size 20cm length, 20cm wide supplied in a 2 Litre cannister
Dry Stencil Wipes	White spun lace, Polycellulose 65gsm Lint free wipes with a smooth surface. Low lint and solvent resistant. Wipes are supplied dry.		Any cleaning application. Ask about are cleaning solutions to go with the dry wipes.	100 wipes sheet size 20cm length, 20cm wide supplied in a 2 Litre cannister
Total Clean 130 Stencil Cleaner	A CFC free cleaning solution with a moderate evaporation rate for the removal of rosin, modified rosin and no clean solder paste, Total clean is virtually odourless , easy to use and ozone friendly.		A cleaner for the removal of rosin and no clean solder paste.	500ml trigger spray bottles
Total Clean Advance Flux Residue Remover	A CFC Free solvent based cleaning solution for bench top removal of flux residues after the soldering process. Total Clean will dissolve most flux ingredients quickly and efficiently, leaving assemblies cleaner than normal cleaning agents. Total clean is easy to use, fast evaporating and ozone friendly. Total clean leaves no residue.		A bench-top flux residue remover. Safe to use on most plastics, fabrics and surface coatings.	400ml aerosol with spout and brush attachment
Total Clean 300 Total Submersion Cleaner	A blend of oxygenated solvents, free from CFC’s. Total clean 300 is totally miscible in water and is biodegradable, Total Clean 300 has a low surface tension, ensuring efficient penetration and cleaning under SMT components. Total Clean has a high flash point and low vapour pressure which helps to make it safe and easy to handle. It works at low temperatures and is clear, colourless liquid with only a mild solvent odour.		To remove RA, RMA, Synthetic resin and rosin free flux types from printed circuit boards. Can be used with in-line or stage batch cleaning processes.	0.5L, 1L, 5L, 10L, 25 Litre containers
Total Clean 440 In Line or Stage Batch Cleaner	Total Clean 440 is totally miscible in water and biodegradable. Total Clean 440 has a higher saturation point to allow more cleaning before exhaustion. It works at low operating temperatures and is a clear colourless liquid with only a mild solvent odour.Total Clean can be used with in-line or stage batch cleaning processes.		To remove RA, RMA, Synthetic resin and rosin free flux types from printed circuit boards. Total Clean 440 has a low surface tension, ensuring efficient penetration and cleaning under SMT components.	0.5L, 1L, 5L, 10L, 25 Litre containers
Total Clean 500 Concentrate	A CFC Free cleaning solution designed for use in ultrasonic cleaning or spray and immersion systems. Total Clean has a biodegradable solvent blend designed to clean PCB flux residues to military solvent cleanliness. Total Clean 500 is used as a 5-10% solution in water. The blends of solvents which make up Total Clean 500 dissolve all types of organic residues (including flux and grease) and inorganic material, quickly and efficiently. Total Clean 500 is equipped with an indicator system which warns the user the cleaning solution is exhausted, this eliminates titration checks. The colour change is from pale blue to yellow.		Ideal for removing a wide range of saponifiable and water soluble fluxes from PCB’s, leaving bright and shiny solder joints.	0.5L, 1L, 5L, 10L, 25 Litre containers
Total Clean 505 Saponifier	Total Clean 505 is a water based, non flammable 100% ozone friendly biodegradable solvent blend. It is fully water soluble in water and easily rinsed.		For use in ultrasonic cleaning or spray and immersion systems.	0.5L, 1L, 5L, 10L, 25 Litre containers

Other flux cleaners available, for process specific & specialised application requirements please contact sales@warton-metals.co.uk for more information.